Triumph Tops  .  Endura Tops  .  Endura Plus Tops  .  XL Tops

For best results, proper selection of flat tops is as critical as choosing the cylinder wire. ICC manufactures a wide range of tops to suit different fibres on various makes of cards.
ICC has one of the most sophisticated facilities for the manufacture of these tops, where each top is individually checked to ensure that it conforms to the required specifications. for consistent quality over extended periods at higher production levels, ICC offers the flat tops with High Tensile (HT) and Micro Alloy Steel (MAS) wires.

Triumph : Triumph Tops are intended for processing cotton. The dual density of the High Tensile wire points is arranged in such a manner that it is sparse at the fibre entry point and dense towards the exit. The gentle action ensures better removal of trash and neps, while avoiding fibre rupture.

Endura : Endura tops have a unique setting pattern, which distribute the wire points in the carding direction to give maximum carding power. Recommended for both cotton and synthetics, these tops have needle-sharp points made from High Tensile wires to withstand high carding force.

Endura Plus : This is a extension of the popular Endura series. Made from Micro Alloy Steel wire, the design ensures that even the minute tufts are opened gently and progressively. The special setting pattern eliminates neps and helps in extraction of short fibres and trash.
Recommended for use in fine cotton mixings.

XL : These tops have a standard twill pattern and are available in standard and High Tensile wires. They are recommended for use in cotton and synthetics.