For both Breaker part and intermediate part interlocking metallic wires are recommended and supplied from GWL UK. More and more carding engineers who are using to working flexible fillets are now willing to discover the benefits of metallic wires.

GWL has now introduced CARDRITE a completely new type of metallic card wire. It employs variable pitch on a single morel wire incorporating a flat top already sucessfully used in the worsted industry. the result - a metallic wire that acts comparable to flexible but retains all  the benefits of metallic wire. CARDRITE is equally effective throughout the card, i.e. Cylinder, worker, stripper, doffer, etc.

CARDRITE has deep carding effect. Its use reduces cross-carding variation and improves in fiber loading, fettling - clearing of fiber from the wire which is essential with flexible clothing is reduced. The special geometry of Cardrite wires enables fibre to run straight through the card in a more linear direction, without lateral displacement. Using Cardlite wire will result in reduction of fibre breakage, improvement in fibre control and result in better carding quality at higher production rate.

Cardrite also works extremely well with flexible clothed cards, meaning any change over can occur gradually reducing the capital outlay risk involved in changing a complete wollen card to metallic.

For proper recommendation of wire, please provide us the machine layout and material to be processed

For more information about GWL please visit GWL website www.garnettwire.com or www.cardrite.com